Ferrule Crimp Set
This is what I use to seal the ends of my cables that enter into the terminal blocks. It is recommended to use ferrules rather than tinning the end of the cable using solder as using solder it may break under pressure from the terminal block screw causing a failure. These Ferrules have little nicks in them so the screw holds firm without the risk of coming loose.
This is what I use to seal the ends of my cables that enter into the terminal blocks. It is recommended to use ferrules rather than tinning the end of the cable using solder as using solder it may break under pressure from the terminal block screw causing a failure. These Ferrules have little nicks in them so the screw holds firm without the risk of coming loose.